|
|
|
|
|
Shimizu's WLAN products are Wi-Fi
compliant and are interoperable with certified devices of other
vendors. Shimizu's line of IEEE 802.11b 11Mbps, IEEE 802.11b+ 22 Mbps
and 802.11g 54Mbps
devices offers reliable and cost-effective WLAN solutions.
Backed
by quality-assured manufacturing in Taiwan, Shimizu can undertake
customized OEM design and packaging for major clients. For
finished products, Shimizu features the Instant Wave (NWH/NWE
model) line of WLAN devices complete with drivers and bundled with
software utilities.
For pricing and order information about Shimizu WLAN products,
please contact
wlan@shimizu.com.hk. |
|
|
|
|
|
|
|
Shimizu WLAN
Common Specifications
(Information is for
reference only and subject to change without notice. Data
refers generally to client-side devices and superceded by data
specified individually.) |
|
|
|
| |
|
IEEE 802.11b
11 Mbps |
IEEE 802.11b+
22/44 Mbps |
IEEE 802.11g
54 Mbps |
| |
Data Rate (Mbps) |
11 / 5.5 / 2 / 1
Auto Fallback |
44 / 22 / 11 / 5.5 / 2 / 1
Auto Fallback |
54/48/36/24/18/12/11/9/6/5.5/2/1Mbps with auto fallback
22Mbps (Optional) |
| |
Encryption |
40 / 128 bit WEP |
64 / 128 / 256 bit
WEP |
64/128-bit WEP; Wi-Fi Protected
Access (WPA Q2 Support) |
| |
Output Power |
15 dBm |
15 dBm
|
23dbm |
| |
Available Interfaces |
PCI (Std., Mini Type III-A),
PCMCIA, USB, RJ-45 |
| |
Frequency Range |
2.471GHz ~ 2.497GHz (Japan Band)
2.4GHz ~ 2.4835 GHz (North America, Europe and
Extended Japan Band)
2.445GHz ~ 2.475GHz (Spain)
2.4465GHz ~ 2.4835GHz (France) |
| |
Modulation Technique |
Direct Sequence Spread Spectrum (DSSS) |
| |
Communication Technique |
Half Duplex |
| |
Media Access Control |
CSMA/CA (Collision Avoidance) with
ACK |
| |
# of Selectable
Sub-Channels |
USA & Canada - 11 channels
Europe - 13 channels
Japan - 14 channels |
| |
Sensitivity |
80dBm@22Mbps
84dBm@11Mbps
87dBm@5.5Mbps
90dBm@2Mbps
90dBm@1Mbps
|
54 Mbps OFDM, 10% PER, -75 dBm
48 Mbps OFDM, 10% PER, -77 dBm
36 Mbps OFDM, 10% PER, -82 dBm
24 Mbps OFDM, 10% PER, -86 dBm
11 Mbps CCK, 8% PER, -90 dBm
1 Mbps BPSK, 8% PER, -98 dBm |
| |
Maximum Range |
100 M @ 22Mbps, 150 M @ 11Mbps,
250 M @ 5.5Mbps,
300 M @ 2Mbps, 350 M @ 1Mbps |
|
| |
National Standards Compliance |
USA
FCC Part 15 Class B and C (NWH:Class B only)
Europe / APA
ETSI EN300, EN301, EN60950 compliant, CE Mark
Canada
ISC RSS139
Japan
Telec RCR STD 33, T66, JETA (Customized)
Wi-Fi Compliant |
| |
Operating Environment |
Temperature
0° C ~ 50° C
Humidity
85% @ 40° C
|
| |
O.S. Platform |
Windows 95/98/ME/NT4.0/2000/XP/Linux |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Shimizu WLAN
Additional Specifications - Individual Device |
|
|
^ |
PCI
(V2.1) |
|
|
|
 |
|
NWH3051 - 54 Mbps
(802.11g+)
PCI Card
2dpi Dual Antenna
54/48/36/24/18/12/11/9/6/5.5/2/1Mbps
with auto fallback
22Mbps added; Turbo Mode (Optional)
RF Output Power: 802.11b 17dBm (Typical), 802.11g 14dBm
(Typical)
Voltage: 3.3V ± 5%
Power Consumption:
Transmission mode: 450mA
Receive mode: 270mA
|
|
|
|
|
|
|
|
^ |
USB
(V1.1) |
|
|
|
 |
 |
|
NWH4010 - 11 Mbps
USB 1.1
Diversity Patch Antenna
Sensitivity:
84dBm@11Mbps
90dBm@1Mbps
Voltage: 5.0V ± 5%
Power Consumption:
380mA (Transmitting)
215mA (Receiving)
120 x 77 x 25 mm
|
NWH4020 - 11 Mbps
USB 1.1
Embedded Antenna
with Diversity Patch
Sensitivity:
84dBm@11Mbps
94dBm@1Mbps
Voltage: 5.0V ± 5%
Power Consumption:
350mA (Transmitting max)
300mA (Receiving max)
ONLY 48 x 71 x 15 mm |
|
 |
|
|
|
|
|
|
|
^ |
PCMCIA
(Type II) |
|
|
|
 |
 |
NWH1022 - 44Mbps
(802.11b+)
118 x 54 x 5 mm
Voltage: 3.3V ±
5%
Power Consumption:
550 mA (Transmit)
350 mA (Receive)
Output Power: 15dBm
Software Supports:
Windows 98SE/Me/2000/XP/Linux
|
NWH1050 - 54Mbps
(802.11g+)
118 x 54.0 x 5 mm
Voltage: 3.3V ±
5%
Power Consumption:
550 mA (Transmit)
350 mA (Receive)
Output Power: 802.11b 17dBm (Typical)
802.11g 12dBm (Typical)
Software
Supports: Windows 98SE/Me/2000/XP/Linux
|
|
|
|
|
|
|
|
^ |
Access Point |
|
|
|
 |
 |
 |
|
NWH9210AP -
11Mbps
Wireless Outdoor Access Point
IEEE 802.3 Ethernet
IEEE 802.11b WLAN
Wi-Fi Compliant
10 base-T Ethernet (RJ45)
Radio Wave :Antenna N-Type Connector
Encryption:
64/128 bit WEP
165 x 135 x 55 mm
Input Voltage 12V DC
(external power supply
included)
AC 100-240V
Operation Temperature:
-20°C
to 70°C
Humidity: 5% to 95%, non-condensing
|
NWH660 - 11Mbps
IEEE 802.3 Ethernet
IEEE 802.11b WLAN
Wi-Fi Compliant
10/100 base-T Ethernet (RJ45)
RS232 configuration connector
DC in power connector
D-SUB 9 pin radio wave Antenna
Antenna Type:
Dual dipole diversity
Encryption:
64/128 bit WEP
220 x 145 x 33 mm
DC 5.1 Volt ±
5%
AC 100-240V
Power Consumption:
5.1 Volt, 1.0 A (Typical)
|
NWH650 - 11Mbps
IEEE 802.3 Ethernet
IEEE 802.11b+ WLAN
Wi-Fi Compliant
10 base-T Ethernet (RJ45)
RS-232C V.24 D-SUB 9 pin
Encryption:
40/128 bit WEP
138 x 114 x 37 mm
DC 5.1 Volt ±
5%
AC 100V~240V
Power Consumption:
5.1 Volt, 1.0 A (Typical)
Output Power: 13dBm
|
|
|
|
|
 |
|
|
|
|
|
|
^ |
Wireless Building-to-Building Bridge
|
|
|
|
 |
NWH6110 Wireless
Building-to-Building Bridge links two or more separate
networks (typically located in different buildings) into one
single LAN environment; simply, economically and quickly.
|
NWH6110 - 11 Mbps
Building-to-Building Bridge
IEEE 802.11b WLAN
Wi-Fi Compliant
Detachable Antenna
One RJ45 port
220x145x33mm
DC 5.1 Volt ±
5%
AC 100V~240V
200mW(Max), Up to 30km
Transmission
Range
|
Application
Scenarios
Point-to-Point Mode: The point-to-point bridge mode
connects two networks in different locations through a
wireless connections. This capability allows a single
high-speed connection to the internet to be shared
across separate sites.
Point-to-Multipoint
Mode: The Point-to-multipoint bridge mode connects
more than two networks in separate buildings through a
wireless connection. This capability allows a single
high-speed connection to the internet to be shared
across multiple sites.
Repeater
Mode: Use the bridge as a repeater to extend the
coverage range or to overcome an obstacle that blocks
radio communication. |
|
|
|
|
|
|
|
^ |
Wireless Ethernet Client |
|
|
|
 |
The Ethernet Client serves as a wireless interface to any
Ethernet device. It is operating system independent and
requires no drivers or WLAN configuration. This makes
the Ethernet Client a true plug-and-play WLAN device.
Example Solution:
Connect a notebook with an Ethernet card via RJ45 on the
Ethernet Client and gain instant access to the LAN without
additional configuration. Settings are already set on
the Ethernet Client. This is ideal for temporary users
needing access to the network (hotel room guests, event
venues, exhibitions, etc...). The Ethernet Client
connects wirelessly to Access Points, making it a versatile
and convenient solution for temporary and/or hard-to-wire
environments.
The NWH2210 is a public access device, accessible by any
IEEE802.11 WLAN certified adapter. The NW2210 is a
non-IP device suitable for public service requiring no
manageability.
The NWH2610 is a manageable device that requires IP
configuration. It is suitable, for instance, in a hotel
environment where the service is enabled remotely to provide a
hotel guest access to the WLAN.
|
NWH2210 - 11Mbps
Non-managed version
NWH2610 - 11Mbps
Managed version; requires NWH7610 Access Point
|
Wireless Ethernet Client
Specifications
Standards
Compliance
|
IEEE 802.11b
Note: With proprietary Bridge-Tunnel encoded, NWH2610
(Manageable Version) works with any IEEE 802.11b adapter and
the NWH7610 Access Point ; the NWH2210 (non-manageable
version) works with any IEEE 802.11b/WiFi adapters & access
points. |
|
Radio
Frequency Type |
|
|
Frequency
Band |
2.4GHz |
|
|
11Mbps ( Max);
11/5.5/2/1 Mbps with Auto fall back |
RF
Frequency Range
|
Japan: 2471MHz ~ 2497MHz
North America, Europe & Extended Japan Band: 2400
MHz~2483.5MHz
Spain: 2445 MHz ~2475 MHz
France: 2446.5MHz ~ 2483.5 MHz |
Transmitter
|
20dBm (For North America and
Extended Japan Band); 18dBm (Europe) |
Receiver
|
-83dBm (Typical) @11Mbps
|
|
Antenna
Type |
Integrated built-in dual
dipole antenna with diversity |
|
Interface Type |
Ethernet Port |
|
Security |
40-bit/128-bit WEP encryption |
|
|
|
|
Operating Environment |
Operating: -0°C
~ +50°C
(Except RF output power and sensitivity)
Storage:-30°C
~ +70°C |
|
Dimensions |
100 x 65 x 115mm (3.94 x 2.56 x 4.53in.) |
|
Power |
Power Voltage: 5.1
Volt DC ¡Ó ±5 %
Power Voltage:AC adapter AC
100V~240V
Power Consumption: 5.1 Volt,
1.0 A (Typical) |
|
Regulatory
Approval |
FCC Part 15 Class B,
CE Mark: ETS 300 328 and ETS
300 826
TELEC: ARIB STD-T66, JATE |
|
OS Support |
Supports any operating system |
|
|
|
|
|
|
|
|
^ |
Wireless
Secure Router |
|
|
|
|
NWH8010 - 11Mbps |
The NWH8010 Wireless Secure
Router provides a powerful and useful combination of wireless
internet access and effective security features.
- Reliable Internet routing
- Virtual Private Network (VPN) Pass-through
- NAT front-end firewall masks the network
- SPI (Stateful Packet Inspection)
- Anti-Denial of Service monitor
- Access Control and Management
- Multiple Public IP Addressing and Port Forwarding
- Advanced IP Multicasting
- Dynamic DNS Support
- Wireless LAN Routing
|
|
|
Secure Wireless Router
Specifications
|
Performance |
|
Wired Data Rates |
10/100Mbps autosensing (full-duplexing
switch) |
|
Wireless Data Rates |
11Mbps (Max.)
11/5.5/2/1Mbps, auto-fallback |
|
Wireless Range (indoors) |
Up to 100 meters (328 feet)
(depends on the interference conditions and environment) |
|
Wireless Transmission Power |
20dBm |
|
|
|
LAN |
|
Number of PCs Supported |
Up to 253 |
|
Number of Ports |
4 RJ-45 10/100 switched
Ethernet ports |
|
Standard Compliance ¡V Wired |
10Base-T/100Base-TX
autosensing |
|
Standard Compliance ¡V
Wireless |
IEEE802.11b and Wi-Fi
Compliant |
|
Wireless Radio Type |
2.4GHz; DSSS (Direct Sequence
Spread Spectrum) |
|
WEP Data Encryption Options |
40/128-bit |
|
Routing |
DHCP; NAT, TCP/IP, RIP 1&2 |
|
|
|
WAN |
|
Number of Ports |
1 RJ-45 port for a cable/DSL
modem |
|
Firewall |
Stateful Packet Inspection (SPI),
Anti-DoS (Denial of Service) |
|
Management Tools |
Web-based browser, SNMPv2, or
Telnet |
|
VPN |
PPTP client pass-through;
IPSec client pass-through (Each client PC requires 1 public
IP address for pass-through); Supports up to 8 simultaneous
VPN sessions) |
|
|
|
Physical Specifications |
|
Dimensions |
258 x 168 x 45mm (10.2 x 6.6 x
1.8in.). |
|
Antennae |
Dipole type with dual antennae |
|
Operating Environment |
Operating environment:
0~50°C(32~122°F)
Storage environment:
-30~70°C(-22~158°F)
Humidity: up to 40°C
(104°F)
with 85% non-condensing |
|
Input Voltage |
5VDC (includes AC adapter) |
|
Power Consumption |
10 watts |
|
Indicators (LEDs) |
Power, WAN/LAN port activity,
Status |
|
|
|
Package Contents |
|
One NDC InstantWave™ Secure
Router Unit |
Power Adapter |
|
Friendly Users Guide with
CD-ROM |
Quick Installation Guide |
|
One Year Limited Warranty on
Hardware Unit and Power Adapter |
Free Technical Support from
National Data Communications |
|
|
|
Certifications |
|
United States |
FCC Part 15 class B |
|
Europe |
CE |
|
Japan |
TELEC, JATE |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
^ |
Wireless Access Point |
|
|
|
|
NWH660 - 11Mbps |
NWH660 Access Point provides a
high performance and higher-security wireless network.
|
Wireless Access Point Specifications
| Standards
Compliance
|
IEEE 802.11b |
| Radio
Frequency Type |
Direct Sequence Spread
Spectrum (DSSS) |
| Frequency
Band |
2.4GHz |
| Available
Transmit Power |
200mW (Max.) |
|
Transmission Rate
|
11Mbps (Max.)
11/5.5/2/1Mbps auto fallback |
| Channels
Support |
US/Canada: 11 Channels (1~11)
Major European Country: 13 Channels (1~13)
France: 4 Channels (10~13)
Japan: 13 Channels (1~13) or 14 Channels (1~14) |
| Transmission
Range |
Up to
300m(984ft)outdoors
(depends on the interference conditions and environment)
Up to 100m(328ft)indoors
(depends on the interference conditions and environment) |
| Access
Point Interfaces |
10Base-T/100Base-TX:RJ-45RS-232:
DSub 9 pin Radio Wave: Antenna-Reverse-SMA
|
| Antenna
Type |
Dual dipole
diversity |
| Security
Systems |
64-bit/128-bit
WEP encryption; Secure SSID;
802.1x support (Windows XP only); MAC Access Control;
Administrative Access Control; Unauthorized wireless Access
Alert |
| Software
Support |
Web-based management;Windows-based
network management WMS(SNMP for MIB I and MIB II); User
Isolation; Kick Start; Access Control; Protocol
filtering; Trap Management; Upgradeable Firmware; Auto
IP Assignment; AP Discovery; DHCP Client,
Telnet(Optional)
|
| Operation
Environment |
Operating Temperature: 0~55°C
(32 ~ 131°F)
Storage Temperature: -30~70°C (-22
~ 158°F)
Humidity: Maximum 85% at 40°C non-condensing |
|
Dimensions |
220x145x33mm
(8.66x5.71x1.30in.) |
|
Power |
DC 5.1 Volt +
5%; 2A (Max.); AC adapter AC 100V ~ 240V; 1.0A (Typical);
Power Comsumption: 5.1Volt. 1.0A(Typical) |
|
Regulatory Approval |
FCC Part 15 B
(US); CE; TELEC |
Network Management
System OS Support |
Windows 95/98/Me/NT4.0/2000/XP |
|
|
|
|
|
 |
|
|
|
|
|
|
^ |
Wireless Outdoor Bridge |
|
|
|
|
NWE9211 - 11Mbps |
The NWE9211 11 Mbps Outdoor
Bridge links two or more separate networks (typically
located in different buildings) to create a single expanded
LAN quickly, simply, and economically. It delivers higher
transmission rates than an E1 or T1 line, and eliminates the
inconvenience of installing an expensive leased line or
fiber-optic cable.
The NWE9211 fully complies with the IEEE 802.11b standard.
Combining superior wireless technology and advanced
features, the NWH9210 Outdoor Bridge is a reliable,
high-performance, cost-effective solution for the most
demanding wireless networking environments.
|
Wireless Outdoor Access Point Specifications
| Standards
Compliance
|
IEEE 802.11b |
| Radio
Frequency Type |
Direct Sequence Spread
Spectrum (DSSS) |
| Frequency
Band |
2.4GHz |
| Available
Transmit Power |
200mW (Max.) |
|
Transmission Rate
|
11Mbps (Max.)
11/5.5/2/1Mbps auto fallback |
|
Transmission Characteristics |
RF output power: 23 dBm (max.)
Frequency stability: within ±25 ppm |
|
Receiver Characteristics |
Sensitivity: -83 dBm |
|
Security |
64- and 128-bit WEP
encryption; SNMP authentication for authorized access |
| Software
Support |
SNMP-based network
management tools for Microsoft Windows included;
features include
MIB I and MIB II support, bridge discovery, protocol
filtering, trap management, firmware upgrades.
|
| Operation
Environment |
Operating Temperature: -20 to
70°C
Storage Temperature: -30~80°C
Humidity: 5% to 95%, non-condensing |
|
Dimensions |
237x152x55mm |
|
Power |
Input
voltage 24V DC; external power supply included (100V to
240V AC) |
|
Transmission Range |
Up to 30 km (18 miles) at 11
Mbps* |
|
|
|
|
|
Wireless Outdoor Access Point |
|
|
|
|
NWH9210AP - 11Mbps |
NWH9210AP Outdoor Access Point
Offers all the interoperability, expandability, security and
manageability that high performance wireless networks demand.
It can withstand the harshest weather conditions, including
high winds, rain and snow.
|
Wireless Outdoor Access Point Specifications
| Standards
Compliance
|
IEEE 802.11b |
| Radio
Frequency Type |
Direct Sequence Spread
Spectrum (DSSS) |
| Frequency
Band |
2.4GHz |
| Available
Transmit Power |
100mW (Max.) |
|
Transmission Rate
|
11Mbps (Max.)
11/5.5/2/1Mbps auto fallback |
| Channels
Support |
US/Canada: 11 Channels (1~11)
Major European Country: 13 Channels (1~13)
France: 4 Channels (10~13)
Japan: 13 Channels (1~13) or 1 (14th) |
| Access
Point Interfaces |
10Base-T:RJ-45; Radio Wave
Antenna - N Type connector
|
| Security
Systems |
64-bit/128-bit
WEP encryption; Secure SSID;
802.1x support (Windows XP only); MAC Access Control;
Administrative Access Control; Unauthorized wireless Access
Alert |
Software
Support
(IWMS management tool) |
SNMP for MIB I and MIB II;
Windows-based network management tools; User Isolation;
Kick start; Access Control; Protocol Filtering; Trap
Management; Self-Diagnostic Test; Upgradeable
Firmware;
Auto IP Assignment; AP Discovery; Seamless Roaming; DHCP
Client
|
| Operation
Environment |
Operating Temperature: -20 to
70°C
Storage Temperature: -30~80°C
Humidity: 5% to 95%, non-condensing |
|
Dimensions |
165x135x55mm
(6.52x5.34x2.17in.) |
|
Power |
Input
voltage 12V DC; external power supply included (100V to
240V AC) |
|
|
|
|
|
Wireless Outdoor AP/Bridge |
|
|
|
|
NWE9251 - 54Mbps |
The NWE9251 is a 2.4GHz 802.11g
Wireless Outdoor Bridge that compliant 802.11b/g standards.
The NWE9210 covers a large operating distance for Wireless
LANs and broadband Internet Access with transfer data rate
up to 54Mbps. It links two or more separate networks
(typically located in different buildings) to create a
single expanded LAN quickly, simply, and economically. The
NWE9251 delivers higher transmission rates than an E1 or T1
line, and eliminates the inconvenience of installing an
expensive leased line or fiber-optic cable. The NWH9250
fully complies with the IEEE802.11b/g standard. Combining
superior wireless technology and advanced features, the
NWE9251 Wireless Outdoor Bridge is a reliable,
high-performance, cost-effective solution for the most
demanding wireless networking
|
Wireless Outdoor Access Point /
Bridge Specifications
| Standards
Compliance
|
IEEE 802.11g/b Compliance |
| Radio
Frequency Type |
Direct Sequence Spread
Spectrum (DSSS) |
| Frequency
Band |
2.4GHz |
| Available
Transmit Power |
200mW (Max.) |
|
Transmission Rate
|
54/48/36/24/18/12/11/9/6/5.5/2/1Mbps with auto fallback
22Mbps (Optional) |
|
RF Output Power |
802.11b: 23 dBm (Typical)
802.11g: 20dbm (Typical) |
|
Receiver Characteristics |
54 Mbps OFDM, 10% PER, -75 dBm
48 Mbps OFDM, 10% PER, -77 dBm
36 Mbps OFDM, 10% PER, -82 dBm
24 Mbps OFDM, 10% PER, -86 dBm
11 Mbps CCK, 8% PER, -90 dBm
1 Mbps BPSK, 8% PER, -98 dBm |
|
Security |
64/128-bit WEP; Wi-Fi
Protected Access (WPA Q2 Support) |
| Software
Support |
Kick Start (Advance
discovery protocol for easy to use); Web-based Tool;
Bridge Auto Learning (Without the hassle of MAC number
records); SNMP Support (Q2 Ready)
|
| Operation
Environment |
Operating Temperature: -20 to
60°C (Except RF outout power and sensitivity.)
Storage Temperature: -30~70°C
Humidity: 5% to 95%, non-condensing |
|
Dimensions / Weight |
237x152x55mm / 1.4kg |
|
Power |
Input
voltage 24V DC; external power supply included (100V to
240V AC) |
|
|
|
|
|
Wireless Outdoor AP/Client Bridge |
|
|
|
|
NWE9280 - 54Mbps |
Key Features
- Dual-band Access Poist
Wlan 2.4GHz 11Mbps and 5GHz band 54Mbps
- Support IP Tunnel,
Roaming, MAC Address and Protocol Filtering
- Support Security
802.1x, DHCP
- Support SNMP, Web and
Telnet Management
|
Specifications
|
CPU Platform |
Hitachi SH-4 240MHZ |
|
Cable LAN |
Ethernet Standard |
IEEE 802.3 (10BASE-T)
IEEE802.3u (10BASE-TX) |
| |
Data Rate |
10/100Mbps |
| |
Access Method |
CSMA/CD |
| |
Communication |
Half Duplex and Full Duplex |
| |
Number of Ports |
1(10BASE-T/100BASE-TX) |
|
Wireless LAN |
IEEE 802.11a |
Transmission |
|
|
Channel |
5.2GHz Band : 4ch(34,38,42,46)
5.8GHz Band :
5ch(149,153,157,161,165) |
|
Data Rate |
54,48,36,24,18,12,9,6 Mbps
(fix/auto operation) |
|
Access Method |
CSMA/CA + ACK (RTS/CTS) |
|
RF Output Power |
17 dBM (Max.) |
|
Security |
WEP(64/128/152Bit) or
AES(128Bit)/WSL(original code) together, and MAC address
filtering and IEEE802.1X |
|
IEEE802.11b |
Transmission |
IEEE802.11b, CCK, QPSK, and
BPSK |
|
Channel |
13ch(1~13) |
|
Data Rate |
54,48,36,24,18,12,9,6 Mbps
(fix/auto operation) |
|
Access Method |
CSMA/CA + ACK (RTS/CTS) |
|
RF Output Power |
20 dBM (Typical.) |
|
Security |
WEP(64/128/152Bit) or
AES(128Bit)/WSL(original code) together, and MAC address
filtering and IEEE802.1X |
|
IEEE 802.11g |
Transmission |
IEEE802.11g OFDM |
|
Channel |
13ch(1~13) |
|
Data Rate |
54,48,36,24,18,12,9,6 Mbps
(fix/auto operation) |
|
Access Method |
CSMA/CA + ACK (RTS/CTS) |
|
RF Output Power |
20 dBM (Typical.) |
|
Security |
WEP(64/128/152Bit) or
AES(128Bit)/WSL(original code) together, and MAC address
filtering and IEEE802.1X |
|
Compact Flash Slot |
CF TYPE |
|
Power Consumption |
48VDC ±10%,0.2A(Max.) |
|
Operation Temperature |
-20° C~60° C |
|
Software Mounting Protocol |
IP(RFC791), ICMP(RFC792),
UDP(RFC768),
TCP(RFC793.896), ARP(RFC826), HTTPD(RFC1866),
TELNET(RFC), FTPD(RFC959), TFTP(RFC783.906),
DHCP(RFC2131) |
|
|
|
|
|
 |
|
|
|
|
|
|
^ |
Wireless
Workgroup Bridge |
|
|
|
|
NWH6210 - 11Mbps
|
The NWH6210 Wireless Workgroup
Bridge provides an affordable and reliable solution to
Ethernet-enabled wireless clients to a wired LAN.
|
|
Quickly and conveniently set up a network for any workplace.
Quickly connect workgroups
located in different workspaces.
|
|
|
|
Wireless Workgroup Bridge
Specifications
|
Standards
Compliance |
IEEE 802.11b |
|
Radio Frequency Type |
Direct Sequence
Spread Spectrum (DSSS) |
|
Frequency Band |
2.4GHz |
|
Transmission Power |
100mW (Max.) |
|
Transmission Rate |
11Mbps (Max.)
11/5.5/2/1Mbps auto fallback |
|
Transmission Range |
Up to 300m (984ft)
outdoors (depends on the interference conditions and
environment).
Up to 100m (328ft) indoors (depends on the interference
conditions and environment) |
|
Antenna Type |
Dual dipole
diversity. Optional directional
antenna. |
|
Security Systems |
40-bit/128-bit WEP
encryption |
|
Bridge (*Note) |
Proprietary single Radio MAC to Multiple Ethernet
bidirectional transfer protocol. |
|
Software Support |
SNMP for MIB II
and Bridge MIB; 40-bit/128-bit WEP encryption; Upgradeable
Firmware,
BSSID Specified Preferred Access
Points; Fixed IP address or obtain an IP address
automatically;
Service
Discovery; Auto-IP. |
|
Operating Environment |
Operating
Temperature: 0 ~ 55°C (32 ~ 131°F)
Storage Temperature: -30 ~ 70°C (-22 ~ 158°F)
Humidity: Maximum
85% at 40°C (104°F) non-condensing
|
|
Dimensions |
138 x 114 x 37mm
(5.43 x 4.49 x 1.46in.)
|
|
Power
|
DC 5.1 Volt +
5%; 2A (Max.); AC adapter AC 100V ~ 240V; 1.0A (Typical) |
|
Regulatory Approval |
FCC Part 15 B
(US); CE; TELEC, JATE |
|
|
|
|
^ |
IWMS - The InstantWave Management System |
|
|
|
|
|
Integrated Management for
InstantWave Wireless Networking Solutions
Download
PDF Datasheet
|
|
The InstantWave Management System (IWMS) is a powerful toolbox
for setting up, securing, monitoring, and maintaining
InstantWave wireless networks. Based on the
industry-standard
Simple Network Management Protocol (SNMP), IWMS was designed
with the special requirements
of wireless networks - and the special advantages of
InstantWave wireless products - in mind.
Using IWMS,
network administrator can ---
-
Manage
entire InstantWave wireless networks from a single
location
-
Configure
and Manage InstantWave wireless devicesquickly and easily
-
Secure the
InstantWave wireless network against unauthorized access
-
Remotely
monitor device and network status and performance
-
Keep network
management costs low
-
Adjust,
store, and retrieve device settings, and propagate them to
any number of devices
IWMS - Interface and Operation
Support
| Managed
Devices
|
All InstantWave Manageable
devices :
NWH660 Wireless Access Point
NWH2610 Wireless Ethernet Client/Pro
NWH6110 Wireless Building-to-Building Bridge
NWH6210 Wireless Workgroup Bridge
All Outdoor Solution Wlan
Products : NWH9200, NWH9210, NWH9210AP, NWH9220, NWH9250
|
| Wireless
Data Rate Support |
11Mbps
(max.) with 5.5/2/1Mbps auto fallback |
| Management
Interface |
10base-T Ethernet: NWH660,
NWH2610, NWH6110, NWH6210
RS-232: NWH660
IEEE802.11b wireless Ethernet: NWH660, NWH2610, NWH6110,
NWH6210, NWH9200, NWH9210, NWH9210AP, NWH9250
|
| IWMS
Software OS Support |
Windows
95/98/Me/NT4.0/2000 and XP |
|
|
|
|
|
|
|
Copyright © 2002 Shimizu
Products (Hong Kong) Ltd.,
Shimizu Technology (Taiwan, R.O.C.) and
Owners of all respective trademarks and products.
All rights reserved.
|
